Return

Configuring a Wi-Fi network on D-Link

Serial number: DIR-600 and higher

  1. Make sure there is a good connection between the router and the computer.
  2. Open your Web browser, e.g.« Internet Explorer », « Firefox » or « Safari ».
  3. In the address bar, enter: « 192.168.0.1 »
  4. A window will open, asking for a username and password. Enter « admin » in the « Username » field. Do not enter anything in the « Password » field, then click « Log In ».

    D-Link DIR-600 et plus - Login
  5. A window will confirm that you have logged in to the D-Link router; you will see an image and various sections.
  6. Click on « Setup » .
  7. Click on « Wireless Settings ».
  8. Follow these steps in order to secure and identify your network.

    1. Select « Enable WPA Wireless Security(enchanced) » in « Security mode ».
    2. Choose a password of at least 8 characters, then type it in the two sections called « Passphrase ».
    3. Select « Auto » in « Cipher Type ».
    D-Link DIR-600 et plus - WIFI Config
  9. To finish, click « Save Settings ».