Accessibility services center

There is no charge for using IP Relay service to place local calls. Long distance calls are billed to the number you are calling from at a reduced rate. The cost of the call will depend on where you are calling from, the type of phone service you have and how you are billing the call.

Registered TTY/teletypewriter users are eligible for an 100% rebate on Canada-to-Canada or Canada-to-U.S. long distance calls that are billed to their Oricom Home phone service.

To register for the discount or get more information on the available long-distance discounts for TTY/teletypewriter users, please contact the Accessibility services centre.

NOTE: Calls to 900 and 976 numbers are not accepted.

Collect, person-to-person and Calling Card calls and calls billed to a third number* are subject to regular operator-handling charges.

Calls from a public phone or hotel must be charged collect, to a third number or using a Calling Card. Calls from a public phone cannot be paid with additional coins or “quick change” cards because the IP Relay operator cannot collect or return your money.
Calls billed to a third number are always checked before a call is connected.

• ANS – answer

• BRS – relay service

• CA – communication assistant (relay operator)

• CC – close-captioned

• GA – go ahead

• GA OR SK – go ahead if you have more to say but I’m finished

• GA TO SK – go ahead to stop keying or goodbye

• HCO – Hearing Carry Over (relay service)

• HD – hold

• HOH ou HH – hard of hearing

• INFO – information

• IP RELAY – Internet Protocol Relay service

• KIT – keep in touch

• OC – open captioned

• OPR – operator

• SK – stop keying (end of call)

• SKSK – hanging up

• TERP – interpreter

• VCO –Voice Carry Over (relay service)

• VRS – Video Relay service

• XXX – mistake

• 1-800-855-0511 (Voice to TTY)

• 711 (TTY to voice)

• 1-800-855-1155 (TTY to TTY)

For Operator Assistance in billing your long distance call to another TTY.

Persons who are deaf, hard of hearing or have a speech disability use a TTY to type their conversations to an IP Relay operator. The operator then reads the typed conversation to the other party. The IP Relay operator then types the other party’s spoken words back to the TTY user.

• Dial 711. The IP Relay operator will answer saying Relay service, (operator’s name) speaking, followed by GA (for go ahead).
• Type in the area code and number you would like to call, and then type GA. Although you are not required to give the operator your name or the name of the person you are trying to reach, doing so helps the agent connect to the person you are calling.
• The IP Relay operator will dial the number. After a brief pause, the operator may tell you: “I’m just explaining the Relay service, please hold.” The IP Relay operator will let you know as soon as someone answers the call, i.e. “John is on the line, GA” (if you provided a name).

Answering an incoming call using your TTY device

• When your phone rings or you see the signal light flashing indicating an incoming call, place the handset on the TTY coupler and switch the power on.

• When you receive a collect call, the TTY operator will type the name of the person calling and ask if you will accept the charges. If you accept, type « Yes, GA ». If not, type « No, GA ».

General tips for TTY users

• A TTY (sold prior to 1995) sends signals at 60 words per minute.

• If you’re making a long distance call, plan what you want to say in advance. Use abbreviations, and don’t worry about spelling.

• When calling a large corporation, be sure to give the operator the department and the name of the person you are trying to reach. This way, the call will progress much more quickly, and the operator won’t have to keep repeating the procedures for using the BRS system. If you know the extension number of the person you are trying to reach, tell the operator at the beginning of the call.

• If you type the wrong word or message, either backspace or type XXX after the mistake.

• When you finish your turn, remember to type « GA » to signal the other person to respond.

• If the person you are trying to reach is already familiar with the IP Relay service, tell this to the operator at the beginning of the call.

• If the message on your screen becomes garbled, press XXX or the spacebar to reconfigure your TTY.

• You can leave messages on answering machines or voicemail systems with the IP Relay service. When you do so, you could mention that you have called using the relay service, and leave the IP Relay service 1 800 number with your area code and phone number.

• When the conversation is finished, type « GA » or « SK ». The other person will either continue or type (SKSK) for goodbye. You should respond with « SKSK ». Complete your call by placing the handset back on the phone and turn the TTY power switch off.

• Always wait for the IP Relay operator’s GA before typing.

• Dial 1-800-855-1155 to place collect, Calling Card and person-to-person calls, or for calls billed to a third number. These calls are subject to regular operator-handling charges and are not eligible for TTY-user discounts.

• If you have trouble dialling a call yourself (i.e. you are cut off during your conversation or your message is garbled due a problem with the line), the TTY operator can help you complete the call. Depending on the circumstances, the charges may be adjusted.

In case of an emergency

• Dial 9-1-1 or your local emergency number. Press the space bar intermittently until you get a response.

• Be prepared. Note down your local emergency numbers and keep them near your TTY/teletypewriter for handy reference.

• Note: the IP Relay service is not an emergency service.

You can easily initiate home or mobile phone calls to TTY users using the IP Relay service. A Relay operator will type your spoken words to TTY users and read back their replies.

Placing an Relay service call for voice users

1. Dial 1 800 855-0511. The IP Relay operator will answer saying: « Relay service, (operator’s name) speaking » followed by GA (for go ahead).

2. Provide the IP Relay operator the area code and number you would like to call. Although you are not required to give the agent your name or the name of the person you are trying to reach, doing so helps the agent connect to the person you are calling.

3. The IP Relay operator will dial the number and keep you informed, as you will not be able to hear the line ring. After a brief pause, the operator may tell you: “I’m just explaining the Relay service, please hold. »

4. The IP Relay operator will let you know as soon as someone answers the call, i.e. “John is on the line, GA” (if you provided a name), and read what is typed, followed by “go ahead,” which is your cue to begin speaking. Always finish by saying “go ahead” so TTY users know it is their turn to respond.

General tips for voice users

• Speak directly to the TTY user, not to the IP Relay operator.

• Talk a bit more slowly than usual as the IP Relay operator is typing in word for word what you are saying.

• Spell names.

• Always say “go ahead” when you are finished.

• Always wait for the Relay operator to say “go ahead” before speaking.

• Let the Relay operator know at the beginning of the call if you are familiar with the service.

f you can speak clearly but must use a TTY to see what the other person is saying, you may request Voice Carry Over (VCO). VCO lets you speak for yourself, while a Relay service operator types what the person says to you.

Placing a call to the IP Relay service on your Voice Carry Over phone

1. Dial 711 and watch the ringing indicator light.

2. When the IP Relay service answers, you will see “Relay service, this is [operator’s name and number]” followed by GA.

3. Press your phrase key for VCO ON PLEASE GA.

4. The Relay operator will type back to you VCO IS ON GA. Now they are ready to hear you speak.

5. Tell the Relay operator the name and number of the person you are calling and then say “go ahead”.

6. After the Relay operator hears your go ahead, the operator will type back to you THANK YOU PLEASE HOLD.

7. The Voice Carry Over remains off until the Relay operator connects you to the person you are calling.

8. The Relay operator will update you on the status of the call (ringing, busy and who has answered) by typing to you

9. When the Relay operator has connected with the other person, the operator will type (NAME) IS ON THE LINE, VCO IS ON GA.

10. When you see the « GA » it is your turn to speak. Remember to say “go ahead” when you are done.

Receiving a call on your Voice Carry Over phone from the IP Relay service

1. The IP Relay service will be identified as “Relay service” on your call display.

2. Answer the call and immediately send out your phrase VCO ON PLEASE.

3. This will alert the relay agent that you are ready to speak. He or she will type “This is the Relay service. I have a call for (name if provided). VCO is ON GA.”

4. Respond to the Relay service operator by speaking and say “go ahead” when you are done.

5. The Relay service operator will type what the caller is saying and you will see GA when it is your turn to speak.

NOTE : Since a Voice Carry Over phone cannot be used to receive text and to speak at the same time, the correct use of “go ahead” is necessary for smooth conversations.

If you can hear, but must use a TTY to type what you need to say, you may request Hearing Carry Over (HCO). Hearing Carry Over allows you to hear what the other party is saying while an IP Relay service operator speaks for you by reading what you type to the other person.

Placing a Hearing Carry Over call

1. Dial 711 and ensure that the handset of the phone is inserted into the TTY handset receptacle.

2. When the IP Relay operator answers, “Relay service” will appear along with the operator’s name and operator number, followed by GA (for go ahead. Please note that you will be communicating via only text until the operator gets the person you are calling on the line.

3. Type HCO ON PLEASE, suivi de GA. The IP Relay operator will update you on the status of the call (ringing, busy and who has answered) by typing to you.

4. When the operator has connected with the other person, the operator will type (NAME) IS ON THE LINE, HCO IS ON GA.

5. When you see the « GA » apparaît, you can begin typing. The Relay operator will read your text to the person you have called. Remember to type GA when you are done.

6. Lift the phone handset off the TTY and listen to the other person’s spoken response. When they say “go ahead,” place the handset back down on the TTY and type your response.

7. Type GA to SK (stop keying) when you are ready to end the call.

Receiving a Hearing Carry Over call

1. Answer the call (identified as Relay service on your call display).

2. Immediately place the handset on your TTY, type your greeting and HCO ON PLEASE, GA.

3. The Relay operator will type who they have on the line to speak with you and also type HCO ON GA. Note: You will be communicating only via text until the Relay operator initiates Hearing Carry Over.

4. Type your response, followed by GA. Lift the handset off the TTY and listen to what is said. When you hear the caller say “go ahead,” place the handset back on the TTY and type your response.

5. Type GA to SK (stop keying) when you are ready to end the call.

NOTE : Since a Hearing Carry Over phone cannot be used to receive text and to speak at the same time, the correct use of “go ahead” is necessary for smooth conversations.

The IP Relay service allows people who are deaf or who have become deaf, people with hearing loss or language difficulties to communicate by telephone.

Professionally trained operators will transcribe your words using the IP Relay service.

All calls are strictly confidential and the service is offered free of charge.

• Dial 1 888 735 2921;

• Give your name, area code and telephone number to the operator;

• Then give the name of the person who is deaf or who has become deaf, with hearing loss or language difficulty, and their user number;

• The operator will establish a chat session with your interlocutor who is deaf or who has become deaf, has hearing loss or has a language difficulty, and will notify you when he or she has answered the call.

Please speak slowly as the operator will need to transcribe the information.

The IP Relay service allows people who are deaf or who have become deaf, people with hearing loss or language difficulties to communicate by telephone.

Professionally trained operators will transcribe your words using the IP Relay service.

All calls are strictly confidential and the service is offered free of charge.

• Dial 1 800 855 0511;

• Give your name, area code and telephone number to the operator;

• Then give the name of the person who is deaf or who has become deaf, with hearing loss or language difficulty, and their area code and telephone number to the operator

• The operator will establish communication with the person you are talking to who is deaf or has become deaf, has hearing loss or has a language difficulty, and will notify you when they have answered the call.

Please speak slowly as the operator will need to transcribe the information.

Once you have completed the IP Relay Service form, the service in charge will create your IP Relay account and send you the information.

• You will receive a confirmation email based on the model below, this step officially takes 24 to 48 hours:
  

• You will receive a confirmation email based on the model below, this step officially takes 24 to 48 hours:
  

If you have not received your temporary password for the IP Relay service:

• Use the “Forgotten password” function;
  

• You will be asked to enter your Access Number, your email address and answer your security question;
  
  

• You will then receive an email allowing you to reset your password and access the service;
  
  
  
  

To use the IP Relay service, you will need the following:

Computer requirements:

• Computer with a supported Windows or Mac operating system;

• A broadband Internet connection with a download speed of at least 1 Mbit/s;

• A supported web browser.

Smartphone requirements:

• A smartphone with a QWERTY keyboard;

• A web browser that supports AJAX and Javascript;

• Please consult the user guide of your smartphone for more information.

The IP Relay service allows you to make calls from a computer that meets these requirements; even in an internet café, using a Wi-Fi hotspot or with a laptop equipped with wireless internet.

You don't need a specific device or software.